Modern spatial metal structures: fabrication and erection
https://doi.org/10.37538/2224-9494-2020-2(25)-12-25
Abstract
The growing need for buildings with a large interior space free of intermediate supports for holding mass meetings, sports and cultural events, exhibitions, etc. became an important factor in the development of spatial structures. In determining the appropriateness of using spatial metal structures in comparison with other systems and when choosing a coating scheme, an essential factor is the possibility of simple, fast and labour-intensive manufacturing and installation. Ways and features of the manufacture and installation of modern rod spatial systems (shells and domes), cable-stayed, membrane and combined systems are presented. The analysis of various methods of manufacturing and installation of spatial metal structures are shown. Justification of the need for the scientific and technical support (STS) in the manufacture and installation of structures, a list of the main tasks of the STS and methods for solving them are given. The main results of scientific support for the manufacture and installation of structures are presented. A description of the structures, optimal solutions for their manufacture and installation, examples of constructed structures are given.
About the Author
P. Yeremeyev
TSNIISK named after V.A. Koucherenko JSC Research Center of Construction
Russian Federation
Russian Federation
References
1. Еремеев П.Г. Современные стальные конструкции большепролетных покрытий уникальных зданий и сооружений. М.: Изд-во АСВ, 2009. -336 с.
2. Еремеев П.Г., Канчели Н.В. Большепролетное светопрозрачное покрытие Гостиного двора в Москве. // Монтажные и специальные работы в строительстве. 1998. № 7-8. - С. 42-46.
3. Еремеев П.Г., Киселев Д.Б., Савельев В.А. Стальные несущие конструкции покрытия над трибунами стадиона "Локомотив". // Монтажные и специальные работы в строительстве. 2002. № 8. (специальный выпуск). - C. 7-13.
4. Лебедь Е.В., Алукаев А.Ю. Большепролетные металлические купольные покрытия и их возведение. // Строительная механика инженерных конструкций и сооружений». 2018. Т. 14. No 1. С. 4-16.
5. Монтажные и специальные работы в строительстве. 2005. № 3. (специальный выпуск).
6. Трофимов В.И., Каминский A.M. Лёгкие металлические конструкции зданий и сооружений. М.: Изд-во АСВ, 2002. - 573 с.
7. Осипова А. В. Работа сетчатого купола при монтаже навесным способом. // Молодой ученый. 2018. № 20. С. 162-164.
8. Chilton J. Space Grid Structures. Design and construction Architectural Press. London. 2000.-180 p.
9. Deifeld T.E.C., Pauletti R.M.O. Numerical Simulation of the Assembling of Tensegrity Domes. Proceedings of the XXVI Iberian Latin-American Congress. Brazil. CILAMCE. - 2005.
10. Lazaro C., Domingo А. Detailing and Construction of the Pantadome Roof Structure for a Bullring in Xativa (Spain. International Journal of Space Structures 25(4), December 2010. - Рр. 229-241.
11. Lombardinia D., Geyera S. Cable Erection of Krasnodar Stadium Suspended Roof. // Procedia Engineering. December 2016. -pp 407-415.
12. Mukaiyama Y., Fujino T., Kuroiwa Y., Ueki T. Erection Methods for Space Structures. // Proceedings of the IASS Symposium, Valencia, 2009. Рр 1951-1962.
13. Seidel M. Tensile surface structures: a practical guide to cable and membrane construction. Berlin: Ernst & Sohn. 2009. 199 p.
14. Zhang A., Sun C., Iang Z. Experimental study on the construction shape-forming process and static behaviour of a double strut cable dome. // Journal of Zhejiang University-SCIENCE. 2018. № 19(3). Pp. 225-239.
Review
For citations:
Yeremeyev P. Modern spatial metal structures: fabrication and erection. Bulletin of Science and Research Center of Construction. 2020;25(2):12-25. (In Russ.) https://doi.org/10.37538/2224-9494-2020-2(25)-12-25
Views:
416
Email this article 