Testing of compound posts of cold-bent C-shaped profiles
https://doi.org/10.37538/2224-9494-2020-2(25)-106-116
Abstract
This article is devoted to the analysis of results of in-kind tests of compound posts from cold-bent C-shaped profiles. The article considers the nomenclature of profiles of compound posts, presents the form of application of load on test samples, the equipment and control devices with which tests were carried out, as well as the comparison of the results of the experiment with the results of numerical analysis, including on the software finite element complex ANSYS. Conclusions were drawn from the results of the tests and comparison of the results of numerical analysis and in-kind experiment. Recommendations for practical design are given.
About the Author
G. Nefedov
TSNIISK named after V.A. Koucherenko JSC Research Center of Construction
Russian Federation
Russian Federation
References
1. Лампси Б.Б. Прочность тонкостенных металлических конструкций. - М.: Стройиздат, 1987. - С. 135-169.
2. Конаков А.И. Контроль за состоянием конструкций замерами деформаций / Исследования надежности металлических конструкций. ЦНИИСК, труды института. - М.: ЦНИИСК, 1979. - С.117-122.
3. Гарднер Л., Нетеркот Д.А. Руководство для проектировщиков к Еврокоду 3: Проектирование стальных конструкций EN 1993-1-1, EN 1993-1-3, EN 1993-1-8. Перев. с англ. - М.: МГСУ-МИСИ, 2013. - С.54-160.
4. СП 260.1325800.2016 Конструкции стальные тонкостенные из холодногнутых оцинкованных профилей и гофрированных листов. Правила проектирования.
5. СП 16.13330.2017 Стальные конструкции. Актуализированная редакция СНиП II-23-81*.
Review
For citations:
Nefedov G. Testing of compound posts of cold-bent C-shaped profiles. Bulletin of Science and Research Center of Construction. 2020;25(2):106-116. (In Russ.) https://doi.org/10.37538/2224-9494-2020-2(25)-106-116
Views:
243
Email this article 